Separation of crude palm oil components by semipreparative supercritical fluid chromatography

Successful separation of triglycerides, diglycerides, free fatty acids, carotenes, tocopherol, and tocotrienols from crude palm oil has been achieved by supercritical fluid chromatography (SFC) with a combination of a C18 and a silica gel column. The separation was carried out by the programmed extraction elution method. Free fatty acids were separated into five components by gas-liquid chromatography; tocopherol and tocotrienols were also separated into four components by SFC analysis, and the pure fractionated carotenes were obtained by preparative SFC. Thus, by using supercritical fluid chromatography, crude palm oil components can be separated and fractionated, based on differences in their functional groups.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Infrared thermography for inspecting the adhesion integrity of plastic welded joints

This work aim at developing a non-destructive tool for the evaluation of bonded plastic joints. The paper examines infrared thermographic transmission and reflection mode imaging and validates the feasibility of the thermal NDT approach for this application. Results demonstrate good estimation performance for adhesion integrity, uniformity and bond strength using a transmission mode application of infrared thermography. In addition, results from a pulsed infrared thermographic application using a modified dynamic infrared tomography scheme show good performance for estimating adhesion layer thickness mapping and detecting delaminations.     

Corrosion behavior of Fe-20Cr and Ni-20Cr alloys in Ar-H2O-HBr gas mixtures at 1000 K

Discontinuous mass-change measurements and corrosion-product analyses were made for Fe-20Cr and Ni-20Cr alloys after exposing them to Ar-H ₂ O-HBr gas mixtures at 1000 K for 24 hours. Predominantly chromia scales formed on both alloys. Upon cooling, the scales remained adherent to the Fe-20Cr alloy but spalled extensively from Ni-20Cr samples. After tests in HBr-rich gas mixtures, bromine-rich corrosion products were found underneath chromia scales on both alloys while nickel evaporation was observed from Ni-20Cr samples. Preoxidation of the Ni-20Cr alloy prior to exposure to Ar-H ₂ O-HBr gas mixtures increased chromia scale adherence but did not prevent nickel loss from the alloy. Chromia scales formed on the Fe-20Cr alloy were more protective due to the absence of iron oxides in the scale. Large NiO crystals formed over the Ni-20Cr alloy decreased chromia-scale adherence and increased nickel loss from the alloy due to the low stability of NiO in HBr-containing gas mixtures.     

A study of the thermal expansion of isostructural organic radical cation salts κ-(BEDT-TTF)2Cu[N(CN)2]X (X = Br, Cl,I)

High resolution thermal expansion measurements on single crystals of κ-(BEDT-TTF)₂Cu[N(CN)₂]X, with X = Br, Cl, I were performed along the three principal directions in the temperature range from 2 to 300K. The temperature dependence of the linear thermal expansion of the two superconductors (X = Br, Cl) is found to be completely different from that of the non-superconducting I-salt. Cooling the I-crystal, we found an elongation of the c- axis, a larger contraction of the a-axis and a smaller contraction of the b-axis in comparison to the bromide- and the chloride- salt. Common to the three compounds are large anomalies in the linear thermal expansion coefficients _i at a temperature T_d = 84K, 80K, 73K for X = I, Br, Cl, respectively. The magnitude and the sign of these anomalies in _i strongly depend on the anion composition. At T_d the _i's show steplike changes, which lead to a lattice distortion of opposite sign for the superconductors and for the I-salt. These anomalies indicate a second order phase transition at T_d, which eventually may be related to a disorder-order transformation of the terminal ethylene groups of the donor molecules.     

Crack initiation model for sensitized 304 stainless steel in high temperature water

To investigate the initiation behavior of stress corrosion cracking (SCC) for sensitized Type 304 stainless steel in high temperature water, a constant load SCC test method combined with in situ crack observation technique was employed. The in situ crack observation system allowed us to detect small cracks of at least 100 μm. As a result, a fracture time decreased with an increase in an applied stress. The first cracks were observed at most 3 h before the specimen was fractured under all the stress conditions. After that, many cracks were initiated in a short time to fracture. The fracture was caused by coalescence of multiple cracks rather than by growth of some primary cracks. The simulation model for surface crack initiation was newly developed using a Monte Carlo method, which was based on damage mechanics and stress analysis around the existing cracks. The simulation could represent the empirical results of changes in the crack distribution and the cumulative number of cracks during the SCC tests. It was concluded, therefore, that the crack initiation process should be considered in simulating the life prediction of the material in this SCC system.     

Basic study about cooperative movement between a human and an agent with entrainment

The use of an agent in the environment, as in medical treatment, welfare, the construction field, and the home, is examined. It is necessary for the agent to be able to work cooperatively with a human, and that may be a problem. Therefore, this study pays attention to the phenomenon that is called entrainment. This is the phenomenon where the rhythm of a certain person and the partner in the communication is synchronized. The purpose of this study is to perform a basic examination into applying an entrainment in order to realize cooperation in operations between a human and an agent. Since many human rhythms are expressed by a nonlinear oscillator, we simulated limited cycle oscillators, which are one of two nonlinear oscillators that cause interactions between agents, as the basic examination for this achievement. Consequently, entrainment of limited cycle oscillators with rhythms which differ has been checked in certain conditions. As a result, the possibility that cooperative movement could be gained was suggested.     

Refined mapping of a gene responsible for Fukuyama-type congenital muscular dystrophy: evidence for strong linkage disequilibrium

Fukuyama-type congenital muscular dystrophy (FCMD), the second most common form of childhood muscular dystrophy in Japan, is an autosomal recessive severe muscular dystrophy associated with an anomaly of the brain. After our initial mapping of the FCMD locus to chromosome 9q31-33, we further defined the locus within a region of approximately 5 cM between loci D9S127 and CA246, by homozygosity mapping in patients born to consanguineous marriages and by recombination analyses in other families. We also found evidence for strong linkage disequilibrium between FCMD and a polymorphic microsatellite marker, mfd220, which showed no recombination and a lod score of (Z) 17.49. A "111-bp" allele for the mfd220 locus was observed in 22 (34%) of 64 FCMD chromosomes, but it was present in only 1 of 120 normal chromosomes. This allelic association with FCMD was highly significant (chi 2 = 50.7; P < .0001). Hence, we suspect that the FCMD gene could lie within a few hundred kilobases of the mfd220 locus.     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO₄₊ , in which the phase separation observed in La₂CuO₄₊ is suppressed. A phase diagram in theT– plane is given for La_1.9Bi_0.1CuO₄₊ with excess oxygen. For very small values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly at 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Derivation and implementation of a cone-beam reconstruction algorithm for nonplanar orbits

B.D. Smith (ibid., vol.MI-4, p.15-25, 1985; Opt. Eng., vol.29, p.524-34, 1990) and P. Grangeat (These de doctorat, 1987; Lecture Notes in Mathematics 1497, p.66-97, 1991) derived a cone-beam inversion formula that can be applied when a nonplanar orbit satisfying the completeness condition is used. Although Grangeat's inversion formula is mathematically different from Smith's one, they have similar overall structures to each other. The contribution of the present paper is two-fold. First, based on the derivation of Smith, the authors point out that Grangeat's inversion formula and Smith's one can be conveniently described using a single formula (the Smith-Grangeat inversion formula) that is in the form of space-variant filtering followed by cone-beam back projection. Furthermore, the resulting formula is reformulated for data acquisition systems with a planar detector to obtain a new reconstruction algorithm. Second, the authors make two significant modifications to the new algorithm to reduce artifacts and numerical errors encountered in direct implementation of the new algorithm. As for exactness of the new algorithm, the following fact can be stated. The algorithm based on Grangeat's intermediate function is exact for any complete orbit, whereas that based on Smith's intermediate function should be considered as an approximate inverse excepting the special case where almost every plane in 3D space meets the orbit. The validity of the new algorithm is demonstrated by simulation studies.